At Fly wheel 65 HP

With 6.00 – 16 and 14.9/13-28 tyres, hydraulic lift with 3 – point linkage cat. 1 – 2, square type fenders with flat top: 1,770Kg.

Fiat 8035.05

4 – Stroke, Direct Injection Diesel.

Number of Cylinders: 3

Bore and Stroke: 104 x 115 mm

Piston Displacement: 2,931 cu.cm

Compression Ratio: 17:1

Max. Power at 2,500 Rpm: 65HP

Max. Torque at 1,500 Rpm: 22.7 Kgm

Dry-type Cylinder Liners.

Cooling System: Water

Three-row, brass tube and cooper fin radiator.

Force-feed lubrication system.

Distributor-type injection pump with mechanical speed governor.

Four-bearing crankshaft.

12 Volt Starting System; 4 hp motor.

400 Watt Alternator

100/103 Ah battery, located in front of radiator.

1) Air Filter: Oil-bath with pre-cleaner semiautomatic dust unloader;

2) Fuel Filter: 2 replaceable cartridges;

3) Oil Filter: Easy-to-change, full-flow cartridge.

Vertical exhaust muffler

Fuel tank capacity:  54 Liters

Dual Plate, dry type with separate controls (paddle for transmission and hand lever for PTO).

Diameter of plates: 11in

Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds.

Synchromesh on 3rd, 4th, 7th, and 8th speeds.

Differential with pedal actuated lock and automatic disconnection.

Single-reduction spur gear final drives.

Gear box mounted starter safety switch.

Service: Dry, band-type, mechanical control.

Parking: Manual lever on right side of operator.

Telescopic type, inverted U, variable tread.

Front (8 positions):

1,320 – 1,420 – 1,520 – 1,620 – 1,720 – 1,820 – 1,920 – 2,020 mm

Rear (8 positions):

1,200 – 1,300 – 1,400 – 1,500 – 1,600 – 1,700 – 1,800 – 2,900 mm

Hydro assisted, power steering with Independent Circuit, Turning radius:

– with brakes: 3.1 mm

– without brakes: 3.9mm

Cushioned Spring Suspension; adjustable.

1 – 3/8″ 6 spline shaft.

Fully independent: 540 rpm at 1,967 engine rpm.

High-speed DTO* (1 – 3/8″ Shaft): same speed as engine

(*) for application of belt pulley

With draft and position control.

Draft control through top link.

Gear – type pump driven from engine crankshaft.

Pump capacity:  22.7 liter / min.

Relief valve opening pressure: 150 – 170  kg/sq.cm.

Manual Response control.

3 – point linkage cat. 1 – 2

Lower links with sway restrictors and transverse retaining spring.

Control lever with safety stop.

Max. Lifting capacity: 1,650 Kg

Front: 6.00  – 16

Rear: 14.9 / 13 – 28

Hood with side-hinged cover for engine inspection.

Front grill is easily removable for quick access to air cleaner and battery.

Separate temperature gauge, fuel gauge & tachometer.

With 3 -position headlights.

Head Lights Mounted in Front Grill.

2 pole power connector  (ASAE)

Blue high beam warning light on dashboard

Big Indicator, Parking & Hazard lights

Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator’s manual

– Front End Weights with Frame

– DTO Pulley

– 9 Hole Draw Bar

– DTO Suction Pump

– High Clearance Kit

– Driver’s Cabin